Versioning your ARM templates within a VSTS CI/CD pipeline with Semantic Versioning

I wrote a post recently Versioning your ARM templates within a VSTS CI/CD pipeline. I realised since writing it that it does not address the issue of if you wish to version your ARM Templates using Semantic Versioning. My JSON versioning task I used did not support the option of not extracting a numeric version number e.g. from a VSTS build number. To address this limitation I have modified my Version JSON file task to address.

This change to my task allows it to be used with the GitVersion VSTS task to manage the semantic versioning. For more details on GitVersion see the project documentation.

Hence, I my now able to generate a version number using GitVersion and pass this in to the versioning task directly using a build variable.

  • Add the GitVersion task at the start of the build, with its default parameters
  • Add my JSON versioning task with default parameters apart from
    • Version Number set to $(GitVersion.SemVer)
    • Use Version Number without Processing (Advanced) checked
    • Filename Pattern (Advanced) set to azuredeploy.json
    • Field to update (Advanced) set to contentVersion


In the logs you see output similar to the following

Source Directory: E:\Build2\_work\361\s
Filename Pattern: azuredeploy.json
Version Number/Build Number: 0.1.0-unstable.843
Use Build Number Directly: true
Version Filter to extract build number: \d+\.\d+\.\d+\.\d+
Version Format for JSON File: {1}.{2}.{3}
Field to update (all if empty): contentVersion
Output: Version Number Parameter Name: OutputedVersion
Using the provided build number without any further processing
JSON Version Name will be: 0.1.0-unstable.843
Will apply 0.1.0-unstable.843 to 12 files.
Updating the field 'contentVersion' version
Existing Tag: contentVersion": ""
Replacement Tag: contentVersion": "0.1.0-unstable.843"

Creating test data for my Generate Release Notes Extension for use in CI/CD process

As part of the continued improvement to my CI/CD process I needed to provide a means so that whenever I test my Generate Release Notes Task, within it’s CI/CD process, new commits and work item associations are made. This is required because the task only picks up new commits and work items since the last successful running of a given build. So if the last release of the task extension was successful then the next set of tests have no associations to go in the release notes, not exactly exercising all the code paths!

In the past I added this test data by hand, a new manual commit to the repo prior to a release; but why have a dog and bark yourself? Better to automate the process.

This can done using a PowerShell file, run inline or stored in the builds source repo and run within a VSTS build. The code is shown below, you can pass in the required parameters, but I set sensible default for my purposes

For this PowerShell code to work you do need make some security changes to allow the build agent service user to write to the Git repo. This is documented by Microsoft.

The PowerShell task to run this code is placed in a build as the only task


This build is then triggered as part of the release process


Note that the triggering of this build has to be such that it runs on a non-blocking build agent as discussed in my previous posts. In my case I trigger the build to add the extra commits and work items just before triggering the validation build on my private Azure hosted agent.

Now, there is no reason you can’t just run the PowerShell directly within the release if you wanted to. I chose to use a build so that the build could be reused between different VSTS extension CI/CD pipelines; remember I have two Generate Release Note Extensions, PowerShell and NodeJS Based.

So another step to fully automating the whole release process.

How I fixed my problem that my VSTS Build Extension was too big to upload to the Marketplace

Whist adding a couple of new tasks to my VSTS Manifest Versioning Extension I hit the problem that VSIX package became too big to upload to the Marketplace.

The error I saw in my CI/CD VSTS pipeline was

##vso[task.logissue type=error;]error: 
Failed Request: Bad Request(400) - 
The extension package size '23255292 bytes' exceeds the 
maximum package size '20971520 bytes'

This extension now contains  eleven tasks, four of which are now NodeJS based as opposed to PowerShell. The issue here is whereas PowerShell tasks are usually a file or two of code and maybe a PSM module; NodeJS based ones, as well as my logic, always have a Node_Modules folder full of NPM modules needed for production use. This fact had caused a good deal of bloat in the VSIX package.

The solution was to address my poor management of NPM modules. As many of the versioning tasks are similar in logical structure i.e.

  1. They get a list of files
  2. Extract a version number from the build number
  3. Then apply this to one or more files in a product/task specific manner

there has been some cut and paste coding. This means that I have NPM modules in the tasks package.json file that were not needed for a given task. I could manually address this but there is an NPM module to help, DepCheck.

First install the DepCheck module

npm install depcheck –g

then run depcheck from the command line whist within your task’s folder. This returns a list of modules listed in the package.json that are not referenced in the code files. These can then be removed from the package.json.  e.g. I saw

Unused dependencies
* @types/node
* @types/q
* Buffer
* fs
* request
* tsd
Unused devDependencies
* @types/chai
* @types/mocha
* @types/node
* mocha-junit-reporter
* ts-loader
* ts-node
* typings

The important ones to focus on are the first block (non-development references), as these are the ones that are packaged with the production code in the VSIX; I was already pruning the node_module folder of development dependencies prior to creating the VSIX to remove devDependancies using the command

npm prune –production

I did find some of the listed modules strange, as I knew they really were needed and a quick test of removing them did show the code failed if they were missing. These are what depchecks documentation calls false alerts.

I found I could remove the @type/xxx and tsd references, which were the big ones, that are only needed in development when working in TypeScript. Once these were removed for all four of my NodeJS based tasks my VSIX dropped in size from 22Mb to 7Mb. So problem solved.

Added a new JSON version task to my VSTS Version Extension

In response to requests on the VSTS Marketplace I have added a pair of tasks to added/edit entries in a .JSON format files.

The first is for adding a version to a file like a package.json file e.g.

"name": "myapp",
"version": "1.0.0",
"license": "MIT"

The second is designed for angular environment.ts file e.g.

export const environment = {
production: true,
version: ''

But I bet people find other uses, they always do.

You can find the extension in the marketplace, you need 1.31.x or later to see the new versioner tasks

Announcing a new VSTS Extension for Starting and Stopping Azure DevTest Labs VMs


I have recently been posting on using Azure to host private VSTS build/release agents to avoid agent queue deadlocking issues with more complex release pipelines.

One of the areas discussed is reducing cost of running a private agent in Azure by only running the private agent within a limited time range, when you guess it might be needed. I have done this using DevTest Labs Auto Start and Auto Stop features. This works, but is it not better to only start the agent VM when it is actually really needed, not when you guess it might be? I need this private agent only when working on my VSTS extensions, not something I do everyday. Why waste CPU cycles that are never used?

New VSTS Extension

I had expected there would already be a VSTS  extension to Start and Stop DevTest Lab VMs, but the Microsoft provided extension for DevTest Labs only provides tasks for the creation and deletion of VMs within a lab.

So I am pleased to announce the release of my new DevTest Labs VSTS Extension to fill this gap, adding tasks to start and stop a DevTest Lab VM on demand from within a build or a release.

My Usage

I have been able to use the tasks in this extension to start my private Azure hosted agent only when I need it for functional tests within a release.

However, they could equally be used for a variety of different testing scenarios where any form of pre-built/configured VMs needs to be started or stopped as opposed to slower processes of creating/deploying a new deployment of a DevTest lab VM.

In may case I added an extra agent phases to my release pipeline to start the VM prior to it being needed.


I could also have used another agent phase to stop the VM once the tests were completed. However, I made the call to leave the VM running and let DevTest Labs’ Auto Stop shut it down at the end of the day. The reason for this is that VM start up and shutdown is still fairly slow, a minute or two, and I often find I need to run a set of function tests a few times during my development cycle; so it is a bit more efficient to leave the VM running until the end of the day. Only taking the start-up cost once.

You may have course have different needs, hence providing both the Start and Stop Tasks


This new extension aims to act as a supplement to the Microsoft provided Azure DevTest Lab Extension. Hence to make development and adoption easier, it uses exactly the same source code structure and task parameters as the Microsoft provided extension. The task parameters being:

  • Azure RM Subscription – Azure Resource Manager subscription to configure before running.
  • Source Lab VM ID – Resource ID of the source lab VM. The source lab VM must be in the selected lab, as the custom image will be created using its VHD file. You can use any variable such as $(labVMId), the output of calling Create Azure DevTest Labs VM, that contains a value in the form /subscriptions/{subId}/resourceGroups/{rgName}/providers/Microsoft.DevTestLab/labs/{labName}/virtualMachines/{vmName}.

The issue I had was that the DevTest Labs PowerShell API did not provide a command to start or stop a VM in a lab. I needed to load the Azure PowerShell library to use the Invoke-AzureRmResourceAction  command. This requires you first call Login-AzureRmAccount to authenticate prior to calling the actual Invoke-AzureRmResourceAction required. This required a bit of extra code to get and reuse the AzureRM endpoint to find the authentication details.

# Get the parameters
$ConnectedServiceName = Get-VstsInput -Name "ConnectedServiceName"
# Get the end point from the name passed as a parameter
$Endpoint = Get-VstsEndpoint -Name $ConnectedServiceName -Require
# Get the authentication details
$clientID = $Endpoint.Auth.parameters.serviceprincipalid
$key = $Endpoint.Auth.parameters.serviceprincipalkey
$tenantId = $Endpoint.Auth.parameters.tenantid
$SecurePassword = $key | ConvertTo-SecureString -AsPlainText -Force
$cred = new-object -typename System.Management.Automation.PSCredential -argumentlist $clientID, $SecurePassword
# Authenticate
Login-AzureRmAccount -Credential $cred -TenantId $tenantId -ServicePrincipal

Important to note that for this code to work you have to set the task’s task.json to run PowerShell3 and package the Powershell VSTS API module in with the task.

"execution": {
  "PowerShell3": {
     "target": "$(currentDirectory)\\StartVM.ps1",
     "argumentFormat": "",
     "workingDirectory": "$(currentDirectory)"

If the folder structure is correct changing to PowerShell3 will automatically load the required module from the tasks ps_module folder

In Summary

I have certainly found this extension useful, and I have leant more that I had expect I would about VSTS endpoints and Azure authentication.

Hope it is useful to you too.

Creating a VSTS build agent on an Azure DevLabs Windows Server VM with no GUI – Using Artifacts

In my last post I discussed creating a private VSTS build agent within an Azure DevTest Lab on a VM with no GUI. It was pointed out to me today, by Rik Hepworth, that I had overlooked an obvious alternative way to get the VSTS agent onto the VM i.e. not having to use a series of commands at an RDP connected command prompt.

The alternative I missed is to use a DevTest Lab Artifact; in fact there is such an artifact available within the standard set in DevTest Labs. You just provide a few parameters and you are good to go.


Well you should be good to go, but there is an issue.

The PowerShell used to extract the downloaded Build Agent ZIP file does not work on a non-UI based Windows VM. The basic issue here is discussed in this post by my fellow ALM MVP Ricci Gian Maria. Luckily the fix is simple; I just used the same code to do the extraction of the ZIP file that I used in my previous post.

I have submitted this fix as a Pull Request to the DevTest Lab Team so hopefully the standard repository will have the fix soon and you won’t need to do a fork to create a private artifacts repo as I have.

Update 1st December 2017 The Pull Request to the DevTest Lab Team with the fixed code has been accepted and the fix is now in the master branch of the public artifact repo, so automatically available to all

Creating a VSTS build agent on an Azure DevLabs Windows Server VM with no GUI


As I posted recently I have been trying to add more functional tests to the VSTS based release CI/CD pipeline for my VSTS Extensions, and as I noted depending on how you want to run your tests e.g. trigger sub-builds, you can end up with scheduling deadlocks where a single build agent is scheduling the release and trying to run a new build. The answer is to use a second build agent in a different agent pool e.g. if the release is running on the Hosted build agent use a private build agent for the sub-build, or of course just pay for more hosted build instances.

The problem with a private build agent is where to run it. As my extensions are a personal project I don’t have a corporate Hyper-V server to run any extra private agents on, as I would have for an company projects. My MVP MSDN Azure benefits are the obvious answer, but I want any agents to be cheap to run, so I don’t burn through all my MSDN credits for a single build agent.

To this end I created a Windows Server 2016 VM in DevLabs (I prefer to create my VMs in DevLabs as it makes it easier tidying up of my Azure account) using an A0 sizing VM. This is tiny so cheap; I don’t intend to ever do a build on this agent, just schedule releases, so need to install few if any tools, so the size should not be an issue. To further reduce costs I used the auto start and stop features on the VM so it is only running during the hours I might be working. So I get an admittedly slow and limited private build agent but for less that $10 a month.

As the VM is small it makes sense to not run a GUI. This means when you RDP to the new VM you just get a command prompt. So how do you get the agent onto the VM and setup? You can’t just open a browser to VSTS or cut and paste a file via RDP, and I wanted to avoid the complexity of having to open up PowerShell remoting on the VM.

The process I used was as follows:

  1. In VSTS I created a new Agent Pool for my Azure hosted build agents
  2. In the Azure portal, DevLabs I created a new Windows Server 2016 (1709) VM
  3. I then RDP’d to my new Azure VM, in the open Command Prompt I ran PowerShell
  4. As I was in my users home directory, I  cd’d into the downloads folder
    cd downloads
  5. I then ran the following PowerShell command to download the agent (you can get the current URI for the agent from your VSTS Agent Pool ‘Download Agent’ feature, but an old version will do as it will auto update.
    invoke-webrequest -UseBasicParsing -uri -OutFile
  6. You can then follow the standard agent setup instructions from the VSTS Agent Pool ‘Download Agent’ feature
    mkdir \agent ; cd \agent
    Add-Type -AssemblyName System.IO.Compression.FileSystem ; [System.IO.Compression.ZipFile]::ExtractToDirectory(“$HOME\Downloads\”, “$PWD”)
  7. I then configured the agent to run as a service, I exited back to the command prompt to do this this, so the commands were

I now had an other build agent pool to use in my CI/CD pipelines at a reasonable cost, and the performance was not too bad either.


Future of Reporting on VSTS with VSTS Analytics

Reporting has always been important for software development, simply put the ability to know what has been done, and what remains to be done. For many teams the out the box reporting within TFS/VSTS dashboards has been enough e.g. sprint burndowns and kanban charts etc. Also TFS has always had SQL Reporting Services (SSRS) to provide rich reporting on a whole host of areas; though in my experience few clients use the out the box reports or customise their own reports.

The lack of SSRS based reporting on VSTS has been a blocking limitation for some clients, preventing their move to VSTS. Also irrespective of peoples past use of custom reports, most people would like an easier way, than SSRS, to produce custom reports and charts.

So enter VSTS Analytics Microsoft’s new free reporting option for VSTS that provide a host of reporting options for dashboards, Power BI and OData.

For a great introduction have a look at Gregg Boer’s Channel9 video Visual Studio Team Services Reporting: Dashboards, Power BI, and OData